Betekenis van:
axis of rotation

Voorbeeldzinnen

1. the axis of rotation is parallel to the longitudinal axis of the vehicle;
2. All axes, angles and directions of rotation are shown positive. Notes: (a) the principal fixed axis is the illumination axis;
3. Axial rotation about the longitudinal axis of up to ±3o is permitted.
4. The distance between the centre of the impacting face and the axis of rotation of the pendulum shall be not less than 5 m.
5. ‘Angle of rotation’ means the angle through which the retro-reflecting device is rotated about its axis of reference starting from one given position.
6. The reduced mass ‘mr’ at the centre of percussion of the pendulum is defined as a function of the total mass ‘m’, of the distance ‘a’ [1] between the centre of percussion and the axis of rotation, and of the distance ‘l’ between the centre of gravity and the axis of rotation, by the following equation:
7. The relationship of the reduced mass ‘mr’ of the pendulum to the total mass ‘m’ of the pendulum at a distance ‘a’ between the centre of percussion and the axis of rotation and at a distance ‘l’ between the centre of gravity and the axis of rotation is given by the formula: mr=m1a
8. The geometry of the bodywork section, the axis of rotation and the position of the centre of gravity in the vertical and lateral directions shall be representative of the complete vehicle.
9. the stationary tractor overturns on a slope with a 1/1,5 gradient with a balanced front axle, as soon as the centre of gravity is vertically above the axis of rotation;
10. If the jaw, or a part supporting the jaw, is pivoted about the longitudinal axis, the rotation shall be restrained by a locking torque of at least 100 Nm.
11. ‘Reference point’ of the seat (H point) (see annex 3 to this Regulation) means the trace, in a vertical plane longitudinal in relation to the seat, of the theoretical axis of rotation between the leg and the torso of a human body represented by a manikin;